Below is a list of integrations that can be connected by following the attached installation guide:
- Element-D, ED1 for use with Thermo Fisher Vios 150i/240i Incubator
- Element-D, ED1 for use with Thermo Fisher Heracell Vios 160i/250i Incubator
- Element-D, ED1 for use with Dylos DC1100 Air Quality Monitor
- Element-D, ED1 for use with Eppendorf Galaxy 170R or Galaxy 170S Incubator
- Element-D, ED1 for use with Thermo Fisher Orion Conductivity Meter
- Element-D, ED1 for use with Thermo Fisher Heratherm OGS/OMS/IGS/IMH Oven
- Element-D, ED1 for use with VWR Symphony 53A Incubator
- Element-D, ED1 for use with Thermo Fisher Isotemp Incubator
- Element-D, ED1 for use with Eppendorf/New Brunswick Incubator Shaker
- Element-D, ED1 for use with Rotronic HygoClip2 Probe
- Element-D, ED1 for use with Kendro Heracell 150 Incubator
- Element-D, ED1 for use with Thermo Fisher SteriCycle i160/i250 Incubator
- Element-D, ED1 for use with CO2meter CM-0040 CO2 sensor
- Element-D, ED1 for use with Ohaus Discovery Balance
- Element-D, ED1 for use with Vaisala CO2 Probe
- Element-D, ED1 for use with Sheldon Incubators
- Element-D, ED1 for use with Eppendorf/New Brunswick I26/I26R
- Element-D, ED1 for use with CO2meter CM-0039 or CM-0024 0-1% CO2 sensor